Modular Balustrade System – All Components
Base Plate
| Part No. | For Tube | |
| P010 | 42.4 x 2.0 | View dimensions |
| E010 | 48.3 x 2.6 | View dimensions |
Stainless steel base plate used with 42.4mm x 2mm tube to produce an upright post within a balustrade system.
Base Plate and Floor Post (Welded)
| Part No. | For Tube | |
| P011 | 42.4 x 2.0 | View dimensions |
| E011 | 48.3 x 2.6 | Not Available |
Pre welded 1200mm high upright welded to a standard base plate.
Base Plate Cover
| Part No. | For Tube | |
| P019 | 42.4 x 2.0 | View dimensions |
| E019 | 48.3 x 2.6 | View dimensions |
Stainless steel cover plate for Base Plate component.
Wall Plate
| Part No. | For Tube | |
| P020 | 42.4 x 2.0 | View dimensions |
| E020 | 48.3 x 2.6 | View dimensions |
Stainless steel wall plate for 42.4mm x 2mm tube. Used to fix a handrail to any suitable wall surface.
Articulated Wall Plate
| Part No. | For Tube | |
| P021 | 42.4 x 2.0 | View dimensions |
| E021 | 48.3 x 2.6 | Not Available |
Stainless steel articulated wall plate used to fix a handrail to any suitable wall surface, at various angles.
Small Wall Plate
| Part No. | For Tube | |
| P022 | 42.4 x 2.0 | View dimensions |
| E022 | 48.3 x 2.6 | Not Available |
Stainless steel wall plate that achieves an "invisible" fixing to any suitable wall surface.
Wall Plate Cover
| Part No. | For Tube | |
| P029 | 42.4 x 2.0 | View dimensions |
| E029 | 48.3 x 2.6 | Not Available |
Cover plate for Wall Plate
Breast Work Section
| Part No. | For Tube | |
| P030 | 42.4 x 2.0 | View dimensions |
| E030 | 48.3 x 2.6 | Not Available |
Stainless steel breast work section is used to support a handrail, usually on top of a wall.
Wall Bracket
| Part No. | For Tube | |
| P040 | 42.4 x 2.0 | View dimensions |
| E040 | 48.3 x 2.6 | Not Available |
Stainless steel bracket used with steel or timber handrail to produce a wall mounted handrail.
Articulated Wall Bracket
| Part No. | For Tube | |
| P041 | 42.4 x 2.0 | View dimensions |
| E041 | 48.3 x 2.6 | Not Available |
Stainless steel articulated wall bracket to produce a wall mounted handrail at various angles.
Wall Bracket
| Part No. | For Tube | |
| P042 | 42.4 x 2.0 | View dimensions |
| E042 | 48.3 x 2.6 | Not Available |
Stainless steel wall bracket used with steel or timber handrail to produce a wall mounted handrail.
Wall Bracket (requires welding)
| Part No. | For Tube | |
| P043 | 42.4 x 2.0 | View dimensions |
| E043 | 48.3 x 2.6 | View dimensions |
Stainless steel bracket that requires welding onto stainless steel tube in order to produce a wall mounted handrail.
Wall Bracket with Ring Saddle
| Part No. | For Tube | |
| P044 | 42.4 x 2.0 | View dimensions |
| E044 | 48.3 x 2.6 | Not Available |
Stainless steel bracket with ring saddle fixing, used with stainless steel tube to produce a wall mounted handrail.
Bracket for Glass
| Part No. | For Tube | |
| P045 | 42.4 x 2.0 | View dimensions |
| E045 | 48.3 x 2.6 | Not Available |
Stainless steel bracket used with steel or timber handrail to produce a glass mounted handrail.
Wall Bracket Cover
| Part No. | For Tube | |
| P049 | 42.4 x 2.0 | View dimensions |
| E049 | 48.3 x 2.6 | Not Available |
Cover for Wall Bracket Component.
Short 90° Base Plate
| Part No. | For Tube | |
| P090 | 42.4 x 2.0 | View dimensions |
| E090 | 48.3 x 2.6 | Not Available |
Stainless steel wall plate used to connect tube at a 90° angle to any suitable surface.
Long 90° Base Plate
| Part No. | For Tube | |
| P100 | 42.4 x 2.0 | View dimensions |
| E100 | 48.3 x 2.6 | Not Available |
Stainless steel wall plate used to connect tube at a 90° angle to any suitable surface.
Post Holder
| Part No. | For Tube | |
| P101 | 42.4 x 2.0 | View dimensions |
| E101 | 48.3 x 2.6 | View dimensions |
Stainless steel "side fix" post holder used to produce an upright post within a balustrade system.
Small Post Holder
| Part No. | For Tube | |
| P102 | 42.4 x 2.0 | View dimensions |
| E102 | 48.3 x 2.6 | Not Available |
Stainless steel "side fix" post holder used to produce an upright post within a balustrade system.
Two Part Post Holder
| Part No. | For Tube | |
| P103 | 42.4 x 2.0 | View dimensions |
| E103 | 48.3 x 2.6 | Not Available |
Stainless steel "side fix" 2 part post holder. Use to produce an upright post within a balustrade system.
Underfloor Post Holder
| Part No. | For Tube | |
| P105 | 42.4 x 2.0 | View dimensions |
| E105 | 48.3 x 2.6 | Not Available |
Stainless steel under floor fixed 1400mm upright post.
Flush Ground Post Holder
| Part No. | For Tube | |
| P107 | 42.4 x 2.0 | View dimensions |
| E107 | 48.3 x 2.6 | Not Available |
Stainless steel upright post holder that sits flush with the surface too which it is fixed i.e. concrete, cement or earth.
Support Flange
| Part No. | For Tube | |
| P110 | 42.4 x 2.0 | View dimensions |
| E110 | 48.3 x 2.6 | Not Available |
Stainless steel wall mounted support flange, used to support for the handrail.
Capping Plug Flat (plastic sleeve)
| Part No. | For Tube | |
| P140 | 42.4 x 2.0 | View dimensions |
| E140 | 48.3 x 2.6 | View dimensions |
Stainless steel flat end caps with plastic sleeves.
Capping Plug Round (plastic sleeve)
| Part No. | For Tube | |
| P150 | 42.4 x 2.0 | View dimensions |
| E150 | 48.3 x 2.6 | View dimensions |
Stainless steel half round end caps with plastic sleeves.
Capping Plug with Springs
| Part No. | For Tube | |
| P146 | 42.4 x 2.0 | View dimensions |
| E146 | 48.3 x 2.6 | Not Available |
Stainless steel end cap with springs.
Capping Plug Round (stainless steel)
| Part No. | For Tube | |
| P155 | 42.4 x 2.0 | View dimensions |
| E155 | 48.3 x 2.6 | Not Available |
Stainless steel end cap.
90° Curved Elbow
| Part No. | For Tube | |
| P160 | 42.4 x 2.0 | View dimensions |
| E160 | 48.3 x 2.6 | View dimensions |
Stainless steel 90° curved elbow to connect two pieces of tube.
90° Curved Elbow M/F (with cap)
| Part No. | For Tube | |
| P165 | 42.4 x 2.0 | View dimensions |
| E165 | 48.3 x 2.6 | View dimensions |
Stainless steel curved 90° bend with one fixing for tube and one fixing for an end cap or other fixing.
90° Curved Elbow M/F (with plug)
| Part No. | For Tube | |
| P166 | 42.4 x 2.0 | View dimensions |
| E166 | 48.3 x 2.6 | Not Available |
Stainless steel 90° elbow. One end to connect to any tube and one end with fixing plug.
90° Sharp Elbow
| Part No. | For Tube | |
| P170 | 42.4 x 2.0 | View dimensions |
| E170 | 48.3 x 2.6 | View dimensions |
Stainless steel 90° elbow to connect two pieces of tube.
45° Elbow
| Part No. | For Tube | |
| P175 | 42.4 x 2.0 | View dimensions |
| E175 | 48.3 x 2.6 | Not Available |
Stainless steel 45° elbow to connect two pieces of tube.
Three Way Elbow
| Part No. | For Tube | |
| P190 | 42.4 x 2.0 | View dimensions |
| E190 | 48.3 x 2.6 | View dimensions |
Stainless steel 3 way elbow to connect two handrails to an upright post.
Equal T
| Part No. | For Tube | |
| P210 | 42.4 x 2.0 | View dimensions |
| E210 | 48.3 x 2.6 | View dimensions |
Stainless steel three way connector to connect the handrail at 180° above an upright post.
Tube Saddle
| Part No. | For Tube | |
| P230 | 42.4 x 2.0 | View dimensions |
| E230 | 48.3 x 2.6 | View dimensions |
Stainless steel saddle to connect a handrail to an upright of the same dimensions.
Extended Tube Saddle
| Part No. | For Tube | |
| P230L | 42.4 x 2.0 | View dimensions |
| E230L | 48.3 x 2.6 | Not Available |
Stainless steel saddle to connect a handrail to an upright of the same dimensions.
Stand Off Articulated Rail Support
| Part No. | For Tube | |
| P233 | 42.4 x 2.0 | View dimensions |
| E233 | 48.3 x 2.6 | View dimensions |
Product description here.
Articulated Ring Saddle
| Part No. | For Tube | |
| P234 | 42.4 x 2.0 | View dimensions |
| E234 | 48.3 x 2.6 | Not Available |
Stainless steel articulated ring saddle to connect a handrail to an upright of the same dimensions.
Articulated Tube Saddle
| Part No. | For Tube | |
| P240 | 42.4 x 2.0 | View dimensions |
| E240 | 48.3 x 2.6 | Not Available |
Stainless steel articulated ring saddle to connect a handrail to an upright of the same dimensions.
Articulated Post Bracket
| Part No. | For Tube | |
| P241 | 42.4 x 2.0 | View dimensions |
| E241 | 48.3 x 2.6 | Not Available |
Stainless steel articulated ring saddle to connect a handrail to an upright of the same dimensions.
Articulated Elbow
| Part No. | For Tube | |
| P250 | 42.4 x 2.0 | View dimensions |
| E250 | 48.3 x 2.6 | View dimensions |
Stainless steel articulated elbow for connecting tube at various angles.
Three Way Articulated Joint
| Part No. | For Tube | |
| P251 | 42.4 x 2.0 | View dimensions |
| E251 | 48.3 x 2.6 | Not Available |
Stainless steel three way articulated elbow to connect tube at various angles.
Glass Bracket Round
| Part No. | For Tube | |
| P261 | 42.4 x 2.0 | View dimensions |
| E261 | 48.3 x 2.6 | View dimensions |
Stainless steel glass bracket for holding 8 to 10mm glass. To suit round tube.
Glass Bracket Flat
| Part No. | For Tube | |
| P261FV | View dimensions | |
Stainless steel glass bracket for holding 8 to 10mm glass. To suit flat surfaces.
Vertical Glass Hanger
| Part No. | For Tube | |
| P262 | 42.4 x 2.0 | View dimensions |
| E262 | 48.3 x 2.6 | Not Available |
Stainless steel glass bracket for holding any thickness of glass to a tube in an offset position.
Sign Clamp
| Part No. | For Tube | |
| P265 | 42.4 x 2.0 | View dimensions |
| E265 | 48.3 x 2.6 | Not Available |
Stainless steel sign clamps for attaching a variety of materials ranging from 3mm to 10mm.
Sign Clamp Zamac
| Part No. | For Tube | |
| P267 | 42.4 x 2.0 | View dimensions |
| E267 | 48.3 x 2.6 | Not Available |
ZAMAC sign clamps for attaching a variety of materials ranging from 3mm to 10mm.
8-10mm Glass Bracket Zamac Round
| Part No. | For Tube | |
| P271 | 42.4 x 2.0 | View dimensions |
| E271 | 48.3 x 2.6 | Not Available |
ZAMAC glass bracket for holding 8 to 10mm glass. Available in two types to suit round tube or flat surfaces.
8-10mm Glass Bracket Zamac Flat
| Part No. | For Tube | |
| P271F | 42.4 x 2.0 | View dimensions |
| E271F | 48.3 x 2.6 | Not Available |
ZAMAC glass bracket for holding 8 to 10mm glass. Available in two types to suit round tube or flat surfaces.
12mm Bar Holder
| Part No. | For Tube | |
| P311 | 42.4 x 2.0 | View dimensions |
| E311 | 48.3 x 2.6 | View dimensions |
Stainless steel bar holder for attaching 12mm bar to posts in an upright position.
Wire Tension Kit
| Part No. | For Tube |
| P471 | 42.4 x 2.0 |
| E471 | 48.3 x 2.6 |
Stainless steel articulated connection to attach 4mm wire to an upright post.
Tension Wire Kit - 3m, 5m & 10m
| Part No. | For Tube | |
| SS77040 | 42.4 x 2.0 | View dimensions |
| SS77040 | 48.3 x 2.6 | View dimensions |
The kits comprises of a length of wire pre swaged, a stainless steel rigging screw, a self fit fork and 2 eyebolts.
Nylon Rings
| Part No. | For Tube | |
| P330 | 42.4 x 2.0 | View dimensions |
| E333 | 48.3 x 2.6 | View dimensions |
Nylon rings are used between the connection points of a component and the tube.
Ball with Internal Thread
| Part No. | For Tube | |
| P351 | 42.4 x 2.0 | View dimensions |
| E351 | 48.3 x 2.6 | View dimensions |
Stainless steel balls of various sizes with internal threads to attach to any size tube. Available in a range of sizes.
Gate Hinge
| Part No. | For Tube | |
| P510 | 42.4 x 2.0 | View dimensions |
Stainless steel gate hinge. Both parts must be used in conjunction with each other.
